Why does my geyser trip

In this case, the thermostat should be replaced. It may be worthwhile to replace the heating element at the same time. A leak that allows water to come in contact with any of the electric components is dangerous and can cause the breaker to flip. A leak caused by a failing gasket must be repaired, but always treat the unit as if electricity is still flowing and contact a professional.

Geyser Tripping Your Electricity? Are you experiencing issues with your geyser constantly tripping your power? CALL - Need Urgent Assistance? Frequent Questions. Do I need a plumber or an electrician for geyser problems? This depends entirely on the problem itself. Problems involving the thermostat, water heating, and the electricity tripping will require the services of a certified electrician.

Water expands when heated and the volume of expanded water is directly proportional to the size of the geyser and the thermostat setting. If the volume expanding exceeds this, establish whether the house has balanced pressure. The term " balanced " refers to the cold water take off after the pressure reducing valve. In an unbalanced system where common tap mixers or appliances are using hot and cold water simultaneously , cold water may tend to force the hot water back into the line, which in turn will over pressurize the geyser and cause the expansion relief to flow.

The combined expansion relief pressure reducing valve can be serviced with replacement parts in the event of excessive release of water. Both the expansion relief overflow and the safety valve outlet must be piped to the outside by means of copper pipes, and insulated where freezing can occur. Check that all plumbing connections are secure and that the safety valve is piped to the exterior. Inspect the seams at the front and rear of the geyser and look around the base for any signs of damp or water stains.

It's important to check for water leaks on pipe connections, valves and the area below the geyser. If your geyser doesn't already a one, a drip tray [see diagram below] under the geyser will catch any small water leaks and protect the ceiling. A drip tray should have a drain pipe to the exterior of the roof space. Always keep your proof of purchase which serves as your guarantee to assist us should you need to contact the manufacturer or a qualified plumber.

How to know if your geyser is faulty During this past week the main switch tripped on my distribution board and - after some investigation - it was sourced to the geyser.